New Open-Source Tool Lets Tiny Arduino Boards Talk to ROS 2 Robots
Makers and robot builders can now use cheap microcontrollers with modern robot software, saving money and time.
ros2serial puts an Arduino on ROS 2 over USB serial, supporting topics, services and actions from a few lines in a sketch on boards as small as an Uno. It is meant for the job rosserial did in ROS 1, for projects where micro-ROS is more than needed, and was inspired by rosserial and OSRF’s early ros2_serial_example.
Driver code stays on the board, while a regular ROS 2 node on the host, r2s_bridge, presents the board to the rest of the graph like any other node. According to the article, messages travel packed and little-endian, the bridge converts them to CDR using ROS type introspection, and type names and hashes are checked during the handshake. The project is in its first public alpha, v0.5.0.
- ros2serial connects cheap microcontrollers like Arduino Uno to ROS 2 robots, cutting costs.
- It's efficient and reliable, with error checking and quick recovery from resets.
- Currently in early testing, so not for production use yet, but promising for hobbyists and prototypers.
Why It Matters
This lowers the barrier to building robots, enabling cheaper, faster innovation in education, hobby projects, and small-scale automation.